How to Measure for a Custom Cut-to-Order Backer Board

Need some help with a specific board size? Measuring accurately is critical!

Here are some helpful tips for accurately measuring a surface area (such as a wall space, tabletop, backsplash, etc.) in order to have a backer board to fit. These steps are designed to work with our Skeewbackers, Multi-Art Boards and Acrylic.

🔧 TOOLS & MATERIALS NEEDED

• Measuring tape
• Pencil or marker
• Straight edge or ruler
• Level (for vertical surfaces)
• Notepad or measurement sheet

📏 STEP-BY-STEP INSTRUCTIONS

1. Prepare the Surface

• Clear the area you’re measuring.
• Remove any objects, appliances, or fixtures if necessary.
• For walls, ensure you can reach edges and corners.
• For tabletops, clear everything off the surface.

2. Measure Width and Height (or Length)

• Use the measuring tape to get:
• Width (side to side)
• Height (top to bottom, for walls/backsplashes)
• Length (front to back, for tabletops/counters)
• Take measurements in inches and note each one clearly.
• Double-check all measurements for accuracy.

Pro Tips:

• Measure in multiple places (top, middle, bottom) to catch any unevenness.
• Use a level to check if the surface is straight (especially walls and backsplashes).

3. Label and Organize Pieces (if multiple)

• Number or label each piece, especially if you have several for a complex area.
• Note the orientation (e.g., "top left", "bottom right") to simplify installation.

If you need additional dimensions, please contact us directly - Lweeks@skeew.biz